New and Used Armco and box beam

Used Armco Beam
Reclaimed / Second hand Armco crash barrier.

This is a used product, it is in servicable condition without crash damage.

The beams are 3.5m long, giving a effective length of 3.2m (after overlaping).

New Armco Beam
When these are joined together you will get an effective length of 3.2m as the overlap on the joint will take 0.3m of the total length.
New Armco beam, Sold as beam only. The joining nuts and bolts (lap bolts) are sold seperatly (8 required per join).

Fishtail End NEW
New Fishtail End.

Used to finish off a run of Armco beam.

External Corner NEW
Mitred external 90 degree corner.

This is a New item and is fully galvanised.

Sold as corner only, bolts and fittings available seperatly.

Internal Corner NEW
Mitred internal 90 degree corner.

This is a new item and is fully galvanised.

Sold as corner only, bolts and fittings available seperatly

Pedestrian End NEW
Pedestrian friendly end section for armco beam. Fully galvanised, attached using 8no M16 x 35 lap bolts. Bolt set not included.

Flexi External Corner NEW
Galvanised corner piece for use with Armco beams. Single section, no welds. Bolt sets not included.

Bolt Down H section Post 560mm
Galvanised Boltdown post to take Armco or Box Beam

Bolt Down H section Post 760mm
Galvanised Boltdown post to take Armco or Box Beam

Bolt Down C section Post 560mm
Galvanised Boltdown post to take Armco or Box Beam

Bolt Down C section Post 760mm
Galvanised Boltdown post to take Armco or Box Beam

Hi Viz End Cap
Yellow PVC Armco Safety Fence Capping
Hi Vis yellow PVC end piece.
Slide the piece over an end section of armco to create a pedestrian friendly, highly visible end free of sharp edges. The sleve/cap is 240mm long.

Post Bolt Set
Galvvanised F06 Bolt Set.
Galvanised M16 x 50mm post bolt set. Set includes bolt, 2 washers and nut.

Lap Bolt
Galvanised F07 Crash Barrier Bolt Set.
Galvanised bolt set used to attach armco beams at overlap joints. 8no per joint typically required.
Each set includes one bolt, 2 washers and nut.

Chemical Anchor Stud
This stud is for securing the Bolt down Posts to the floor, It is used in conjunction with a chemical grout.
This stud is a M16 x 190mm.

125mm x 90mm Z Post
Highway specification galvanised "z" post, 125mm x 90mm section, 1200mm long. Suitable for use in a concrete footing.

110 x 50 Reclaimed concrete in post
1160 long 110 x 50 Reclaimed concrete in post.
Can be concreted in directly or can be concreted in using a socket.
Posts are Reclaimed and have signs of weathering.
All the posts are in a re-useable condition.